- Why There's No Universal CLGA Passing Score
- How Talogy Scores the Logiks General Assessment
- Section-by-Section Breakdown: Verbal, Numerical, Abstract
- How Employers Set Their Own Benchmarks
- Intermediate vs Advanced: Different Formats, Different Targets
- What a Strong Raw Score Actually Requires
- Building a Domain-Focused Prep Schedule
- Common Mistakes That Lower Your Effective Score
- FAQ
- CLGA (Logiks General Intermediate) has no published universal passing score - employers set their own cutoffs.
- The test is 50 questions in 12 minutes, split into three separately timed four-minute sections.
- Verbal carries 24 questions, Numerical 16, and Abstract 10 - Verbal weighs heaviest on your raw score.
- Each section is timed on its own, so a slow start in Verbal cannot be fixed with extra time in Numerical.
Why There's No Universal CLGA Passing Score
If you're searching for a single number - "score X out of 50 and you pass" - the honest answer is that Cubiks Logiks General Assessment (CLGA) doesn't work that way. Talogy, the publisher of the Logiks General assessments, designs this as an employer-administered pre-employment screening tool, not a certification with a fixed, published cutoff. That distinction matters more than almost anything else in your prep.
Because Logiks is used across hundreds of different employers and roles, each organization decides internally how strict its benchmark should be for the position being filled. A graduate scheme hiring for a fast-paced analytical role might set a tougher internal bar than a general operations role. Neither bar is published publicly, and Talogy does not release a universal minimum score that applies everywhere.
For a broader look at how this fits into the bigger picture of preparing for the exam, the CLGA Study Guide 2026 walks through a full first-attempt strategy, while CLGA Pass Rate 2026: What the Data Shows digs into what's actually knowable about outcomes.
How Talogy Scores the Logiks General Assessment
Logiks General (Intermediate) is built as 50 total questions completed inside 12 minutes, but that time is not one open block - it is split into three separately timed four-minute sections. Each section starts and stops on its own clock:
- Verbal: 24 questions, 4 minutes
- Numerical: 16 questions, 4 minutes
- Abstract: 10 questions, 4 minutes
Because Talogy draws items from a rotating item bank, no two candidates necessarily see the exact same question set, and the assessment is offered in multiple languages depending on the employer's setup. This means test-takers can't rely on shared question banks the way they might for a fixed-form exam - your prep needs to build the underlying skill, not memorized answers.
Key Takeaway
Since each section is independently timed, running out of time in Verbal does not let you borrow minutes from Numerical or Abstract. Pacing has to be managed section-by-section, not across the full 12 minutes.
For a deeper explanation of exactly how these three areas differ in content style, see the CLGA Exam Domains 2026: Complete Guide to All 3 Content Areas.
Section-by-Section Breakdown: Verbal, Numerical, Abstract
Understanding the weight and format of each domain is the closest thing to a "scoring formula" you'll get for CLGA. Since Verbal makes up nearly half the total 50 questions (24 of 50), it has an outsized influence on your overall raw score compared to Abstract's 10 questions.
Domain 1: Verbal
24 questions in 4 minutes - roughly 10 seconds per item. Expect short passages or statements followed by true/false/cannot-say style logical reasoning, testing whether you can draw only the conclusions the text actually supports.
- Practice separating "stated fact" from "plausible inference"
- Train to skim for the specific clause that answers the question rather than re-reading the whole passage
Domain 2: Numerical
16 questions in 4 minutes - about 15 seconds per item. Typically presented as tables, charts, or short data sets requiring ratios, percentages, and basic arithmetic reasoning rather than advanced math.
- Master fast percentage and ratio estimation without a calculator dependency
- Practice reading table headers and units correctly under time pressure - misreading a unit costs more time than doing the math itself
Domain 3: Abstract
10 questions in 4 minutes - the most generous per-item time at roughly 24 seconds. This section uses shape and pattern sequences to test non-verbal, fluid reasoning independent of language or numeracy.
- Look for rotation, reflection, and progressive addition/subtraction of elements across a sequence
- Because there are fewer questions here, each one has a proportionally smaller effect on your Abstract sub-score than a single Verbal item has on Verbal
How Employers Set Their Own Benchmarks
Because Talogy licenses Logiks General to individual employers rather than administering a single standardized certification exam, the "passing score" you need is really the internal benchmark set by whichever organization invited you to test. Some use percentile bands relative to a norm group of previous applicants; others simply rank all candidates and move a set number forward.
What stays constant across employers is the test format itself - the 50-question, 12-minute, three-section structure doesn't change based on who's hiring. That consistency is exactly why raw preparation on the actual domains pays off regardless of which company administers your assessment.
If you're trying to figure out whether you're even eligible to sit this assessment for a role you're applying to, the CLGA Requirements 2026: Eligibility, Prerequisites & How to Qualify guide covers how invitations and eligibility typically work.
Intermediate vs Advanced: Different Formats, Different Targets
Talogy also publishes a Logiks General (Advanced) version, which uses a different structure entirely: 30 questions in 20 minutes. Candidates sometimes confuse the two when researching "passing scores," so it's worth being precise about which one you're facing.
| Feature | Logiks General (Intermediate) - CLGA | Logiks General (Advanced) |
|---|---|---|
| Total questions | 50 | 30 |
| Total time | 12 minutes | 20 minutes |
| Section structure | 3 separately timed 4-minute sections | Combined timing across question set |
| Domains covered | Verbal (24), Numerical (16), Abstract (10) | Verbal, Numerical, Abstract reasoning |
| Typical use case | Broader intermediate-level roles | Roles requiring deeper reasoning depth |
Since this site focuses on Logiks General (Intermediate) - what most candidates mean when they say CLGA - all pacing and section advice above applies specifically to the 50-question, 12-minute format with three independently timed sections.
What a Strong Raw Score Actually Requires
Without a published numeric cutoff to target, the most useful substitute is understanding what it takes to answer a high proportion of questions correctly within the time given. In practice, this comes down to three controllable factors:
- Accuracy under a hard stop: Each section ends the moment its four minutes run out, regardless of how many questions remain unanswered. Rushed guessing in the final seconds of Verbal can undo careful work done earlier in that section.
- Consistent pace per question type: Verbal at roughly 10 seconds per item, Numerical at roughly 15 seconds, and Abstract at roughly 24 seconds are the built-in rhythms of the test - training at these speeds beforehand prevents panic when the real clock is running.
- Familiarity with item styles, not memorized items: Because Talogy draws from a rotating item bank, your advantage comes from pattern recognition and reasoning speed, not from recalling specific past questions.
For a realistic sense of how tough candidates generally find this format, How Hard Is the CLGA Exam? Complete Difficulty Guide 2026 breaks down the difficulty by section in more detail.
Building a Domain-Focused Prep Schedule
General study methods only help here when they're mapped directly onto CLGA's three-section structure. Given that Verbal carries the most questions and the tightest per-item time, it deserves the earliest and heaviest focus in a short prep window.
Verbal Foundations
- Drill true/false/cannot-say passages at a 10-second-per-item pace
- Review the exact question phrasing patterns covered in the domains guide
Numerical Speed
- Practice ratio, percentage, and table-reading questions under a 15-second target
- Focus on spotting the correct table row/column before calculating
Abstract Patterns
- Work through shape sequence drills at the more forgiving ~24-second pace
- Log recurring pattern types: rotation, reflection, element addition
Full Timed Run-Throughs
- Simulate the full 50-question, 12-minute, three-section sequence back to back
- Review the one-page recap in the cheat sheet to lock in final reminders
For a condensed version of everything covered across all four weeks, the CLGA Cheat Sheet 2026: One-Page Review of Must-Know Facts is designed as a last-days-before-testing refresher, and running full-length simulations on our practice test platform is the closest way to rehearse the real section-by-section time pressure before test day.
Common Mistakes That Lower Your Effective Score
Most candidates don't underperform because they lack reasoning ability - they underperform because the format catches them off guard. Watch for these specific traps:
- Treating the 12 minutes as one pool: Since Verbal, Numerical, and Abstract are each locked to their own 4-minute window, spending extra time perfecting early Verbal questions steals nothing from Numerical - that time is simply lost.
- Over-reading Verbal passages: With 24 questions in 4 minutes, re-reading full passages multiple times is rarely sustainable; targeted scanning for the relevant clause is faster and just as accurate.
- Skipping calculator-free numerical practice: Many test administrations restrict calculator use or expect quick estimation; practicing exact long division under time pressure wastes seconds you don't have.
- Ignoring Abstract until the end: With only 10 questions, Abstract feels low-priority, but its longer per-item time window (~24 seconds) makes it one of the more approachable sections to secure high accuracy in if you've trained pattern recognition.
Since your registration and testing logistics are set by the hiring employer rather than a fixed public exam calendar, it also helps to understand what to expect procedurally - the CLGA Exam Dates 2026: Testing Windows, Deadlines & Scheduling guide covers how scheduling typically unfolds once you're invited to test.
Frequently Asked Questions
No. Talogy does not publish a universal passing score for Logiks General (Intermediate). Each employer sets its own internal benchmark based on the applicant pool and role requirements.
Logiks General (Intermediate) has 50 questions total across 12 minutes, split into three separately timed four-minute sections: 24 Verbal, 16 Numerical, and 10 Abstract.
No. Verbal, Numerical, and Abstract are each independently timed at four minutes. When a section's clock ends, it moves on regardless of remaining time in that section.
Not reliably. Talogy uses an item bank to vary the specific questions presented, so building genuine reasoning speed and accuracy matters more than memorizing individual items.
No. The Advanced version uses 30 questions in 20 minutes with different timing, while this article covers the Intermediate format used for most CLGA-related hiring assessments: 50 questions in 12 minutes across three timed sections.